Approach category speeds are defined by which formula?
Approach category speeds are defined by which formula?
This speed is defined to be equal to the greater of stall speed (Vso) multiplied by 1.3, or stall speed (Vs1g) multiplied by 1.23.
The landing configuration that is to be taken into consideration can be defined by either the operator or by the aeroplane manufacturer but is most commonly assigned by the manufacturer.
How does a jet engine/gas turbine work?
How does a jet engine/gas turbine work?
Forward motion forces air into the intake which is a convergent duct where it is compressed (causing a temperature rise).
Fuel is added and combustion takes place increasing the volume. The expanding gasses accelerate to the atmosphere through the exhaust duct nozzle producing a propulsive jet.
What is the mean chord line?
What is the mean chord line?
It's the wing area divided by the wing span.
How can you calculate the Operating Mass?
How can you calculate the Operating Mass?
OM = DOM + crew and fuel
What uses the most battery power, to transmit or to receive?
What uses the most battery power, to transmit or to receive?
Transmitting uses more power.
What can you tell about adiabatic lapse rates?
What can you tell about adiabatic lapse rates?
When considering a volume of air, adiabatic lapse rate is the temperature change that is caused by the vertical movement of the volume, andThe Lapse Rate is the rate at which temperature changes with height in the atmosphere.
The Environmental Lapse Rate (ELR) is according to ISA 2°C per 1000 feet increasing altitude.
For unsaturated air, the lapse rate is 3°C per 1000 feet, this is called the Dry Adiabatic Lapse Rate (DALR).
The Saturated Adiabatic Lapse Rate (SALR) is the rate at which saturated air cools with height and is, at low levels and latitudes, 1.8°C per 1000 feet.
Why do we measure speed as a Mach number?
Why do we measure speed as a Mach number?
Mach number describes the speed of sound, which changes with the density of the medium it is travelling through.
When you reach the speed of sound, the compressibility effect creates a supersonic flow along the wing if you exceed a certain mach number.
This causes airflow separation and flutter.
It is therefore much safer and much easier to use a Mach number to express a limit at which compressibility effects start to tear the aircraft apart, as it is a constant value at all altitudes.
If you where picking up 10.000 litres of fuel in Newfoundland (cold weather), and 10.000 litres of fuel in Lima, Peru (hot weather), where would you have picked up the most fuel?
If you where picking up 10.000 litres of fuel in Newfoundland (cold weather), and 10.000 litres of fuel in Lima, Peru (hot weather), where would you have picked up the most fuel?
In Newfoundland. With cold weather density increases, therefore you would pick up a higher mass in Newfoundland.
What does the abbreviation PAPI mean?
What does the abbreviation PAPI mean?
Precision Approach Path Indicator
What is the advantage of a variable pitch propeller? Why not have a fixed propeller?
What is the advantage of a variable pitch propeller? Why not have a fixed propeller?
A variable pitch propeller provides an optimum angle of attack for the propeller blades for a longer range which reduces fuel usage. Fixed pitch propellers are easier to produce and maintain, but reach maximum efficient at only one specific airspeed.