Why will a jet usually not fly at 41.000 feet?
Why will a jet usually not fly at 41.000 feet?
Because of the distance which has to be covered to reach 41.000 feet which may not be convenient for a short flight.
On long flights it is more typical to fly at 41.000 feet when the aircraft weight and performance allows.
How would you load an aircraft for max range?
How would you load an aircraft for max range?
The position of the CG directly influences the fuel consumption of an aircraft. An aft position of the CG makes the aircraft less stable, requiring less lift to be generated in both the horizontal stabilizer and wings, reducing the overall drag of the aircraft, and increasing the max range.
You want to load the the aircraft so that the CG is at, or as close as possible, to the aft limit (Without exceeding it).
What uses the most battery power, to transmit or to receive?
What uses the most battery power, to transmit or to receive?
Transmitting uses more power.
What is the difference between angle of attack and angle of incidence?
What is the difference between angle of attack and angle of incidence?
Angle of attack is the angle between the chord of the aerofoil and the relative airflow.
Angle of incidence is the angle between the chord and the aircrafts longitudinal datum.
What will happen if the primer of your engine/fuel system kept operating?
What will happen if the primer of your engine/fuel system kept operating?
A variable pitch propeller provides an optimum angle of attack for the propeller blades for a longer range which reduces fuel usage, fixed pitch propellers only have a certain rpm.
What would you do in the event of an engine failure below V1, and what would your initial actions be?
What would you do in the event of an engine failure below V1, and what would your initial actions be?
Assuming I'm performing single pilot operations:
-
power idle,
-
max brakes (and reversers if available),
-maintain directional control using rudder input,
-
After coming to a full stop set parking break.
-
Inform ATC 'Stopping'.
-
Initiate the appropriate process to diagnose the problem (ECAM, NITS DODAR, checklists....).
-
When performing multi pilot operations the actions performed by me will depend with my current role: PF, PM and/or CM1 CM2.
What is BEM?
What is BEM?
Basic Empty Mass (BEM) is the mass of the aircraft with the basic equipment, unconsumable fluids and unusable fuel and oil.
While climbing with a SEP, in what temperature range can carb icing occur?
While climbing with a SEP, in what temperature range can carb icing occur?
Carb icing can occur with temperatures as high 30°C and humidity as low as 50%, but it is more likely when below 20°C and high humidity, especially during low power settings.
If in a go-around, which take-off stages will still apply?
If in a go-around, which take-off stages will still apply?
None. The go around procedure is distinct from the take off procedure. You will still have an acceleration altitude, but you will not have a screen height, V1, Vr, V2, flap retraction altitude, etc.
What are the advantages of swept wings?
What are the advantages of swept wings?
Swept wings are:
Better for high speed flight as they have minimal camber and thickness reduce drag and delay Mcrit More stable in turbulence as they produce less lift and as a result they are less responsive to updraughts